top of page

Pumps & Filters NZ 

Discover reliable, energy-efficient pumps, filters, and heating solutions. Our trusted brands and expert team ensure crystal-clear water, lower running costs, and a better pool or spa experience.

family-swiming

Cloudy or green water

undersized filters can’t keep up with debris and algae

Burned-out pumps

wrong sizing or cheap motors fail early and cost more to replace

Excessive chemical use

poor circulation means sanitiser doesn’t spread evenly

Soaring power bills

inefficient systems run longer, wasting electricity

Why Every Pool Needs the Right Pump & Filter

Without the right setup, your pool turns into a costly problem. Aqua-Tech supplies proven pumps, filters, and heating systems built for NZ conditions — trusted by Kiwi families, schools, and resorts.

01

Pool & Spa Heaters

Enjoy warm water all year with energy-saving heat pumps

oasis-urban-i-series-inverter-spa-9-aquatech

02

Pool & Spa Pumps

For reliable water circulation and crystal-clear results

waterco-hydrostorm-high-performance-pool-pump-aquatech

03

Pool & Spa Filters

Remove debris and contaminants for a sparkling clean pool

waterco-exotuf-sand-filter-aquatech

04

Drinking Water Purifiers

Pure, great-tasting water for the whole family

waterco-stoneware-gravity-purifier-aquatech

Explore Our Pool & Spa Range

Pool & Spa Pumps, Filters & Equipment

  • The Poolrite Enduro Range delivers ultra-silent operation, dependable performance, and economical running costs for residential pool and spa systems. Designed and manufactured to exacting standards, each Enduro pump is engineered with a precisely matched chassis and motor to minimise noise while maintaining strong flow and pressure.

    ​

    Built for long-term reliability, the Enduro Range features durable stainless steel components, weatherproof construction, and a large strainer basket to reduce maintenance requirements. With self-priming capability and advanced safety protections, these pumps offer a practical and reliable solution for both new installations and pool upgrades.

    ​

    Key Features

    • Ultra-silent operation for peaceful pool environments

    • Economical running costs with efficient power usage

    • High flow and pressure for effective filtration and cleaning

    • Self-priming design for reliable start-up and operation

    • Stainless steel shaft and assembly hardware for long-term durability

    • Rigid, expansive strainer basket to reduce maintenance frequency

    • Easy installation and servicing with self-aligning unions and adjustable discharge port

    • Weatherproof construction rated to IP44 for safe outdoor use

    • Electrically double-insulated design for added safety

    • Automatic thermal overload protection for peace of mind

    ​​

    Available Models

    • EP550 — 0.75 HP — 550 W

    • EP750 — 1.0 HP — 750 W

    • EP930 — 1.25 HP — 930 W

    • EP1100 — 1.5 HP — 1100 W

     

    Applications

    • In-ground and above-ground swimming pools

    • Spas

    • Solar pool heating systems

    • Water features

  • The Filtermaster FM Range is engineered for large residential and demanding pool environments, delivering strong flow rates, reliable performance, and durable construction for continuous-duty operation. Designed specifically for higher-volume pools, the FM Range combines robust build quality with quiet operation and minimal maintenance requirements.

    ​

    Built for New Zealand conditions, these pumps feature non-corrosive, injection-moulded construction, stainless steel fasteners, and a totally enclosed fan-cooled motor for safe, long-term use. With self-priming functionality and a large strainer basket, the FM Range is ideal for busy households and pools requiring consistent, high-capacity circulation.

    ​

    Key Features

    • Designed for large residential pools and high-demand applications

    • Strong flow rates for efficient filtration and turnover

    • Self-priming design for reliable start-up and operation

    • Non-corrosive, injection-moulded construction for long service life

    • Stainless steel fasteners to prevent rust and corrosion

    • Quick-release Mac Unions for easy servicing and maintenance

    • Carbon and neoprene mechanical seals for leak-free performance

    • IPX5 water protection for dependable outdoor operation

    • Insulation class F with thermal overload protection

    • Rated for continuous, heavy-duty use

    • Large strainer basket with clear lid for easy debris monitoring

    • Motor shaft protected by a specially designed Noryl impeller shaft

    • Totally enclosed, fan-cooled motor (TEFC) for safe, efficient running

    ​​

    Available Models

    • FM750 — 1.0 HP — Suitable for pools 60,000 to 80,000 litres

    • FM1100 — 1.5 HP — Suitable for pools 70,000 to 90,000 litres

    ​​

    Technical Overview

    • Operating voltage: 230V

    • Inlet / outlet: 50mm with 40mm unions

    • Liquid operating temperature range: 5°C to 50°C

     

    Applications

    • Large residential pools (in-ground and above-ground)

    • Pools with higher filtration or turnover requirements

    • Pools requiring reliable, long-duration operation

     

    Warranty

    • 2-year manufacturer warranty

  • The Filtermaster FX Range delivers quiet, reliable pool pump performance designed specifically for residential pool environments. Built for consistent water circulation and low maintenance, these pumps combine durable, non-corrosive construction with dependable self-priming operation.

    ​

    Engineered for New Zealand conditions, the FX Range features injection-moulded components, stainless steel fasteners, and a totally enclosed fan-cooled motor for long service life and safe, continuous operation. With very low operating noise and simple servicing features, the FX Range is ideal for homeowners seeking dependable performance without complexity.

    ​

    Suitable for pools up to 80,000 litres, the Filtermaster FX Range provides smooth, efficient circulation for everyday pool use.

    ​

    Key Features

    • Very quiet operation suitable for residential settings

    • Non-corrosive, injection-moulded construction for long-term durability

    • Stainless steel fasteners for added corrosion resistance

    • Self-priming design for easier installation and operation

    • Large strainer basket with clear lid for simple debris monitoring

    • Quick-release Mac Unions for fast servicing

    • Carbon and neoprene mechanical seals to help prevent leaks

    • Motor shaft protected by a durable Noryl impeller shaft

    • Totally enclosed, fan-cooled motor (TEFC) for safe, reliable operation

    • Thermal overload protection with insulation class F

    • IPX5 water protection rating

    ​​

    Available Models

    • FX1005 — 0.75 HP — Suitable for pools up to 50,000 litres

    • FX1006 — 1.0 HP — Suitable for pools 50,000 to 70,000 litres

    • FX1007 — 1.5 HP — Suitable for pools 60,000 to 80,000 litres

    ​​

    Technical Overview

    • Operating voltage: 230V

    • Inlet / outlet: 50mm with 40mm unions

    • Operating temperature range: 5°C to 50°C

    ​​

    Warranty

    • 2-year manufacturer warranty

  • Product Overview
    Say goodbye to manual winding. The Talos Battery-Operated Reel makes pool cover handling faster, simpler, and cordless. Built from weather-resistant aluminium with a smooth, motorised system — designed for NZ pools up to 6.0m wide.

    ​

    Key Features

    • Battery operated + remote control

    • Quick-charging lithium system

    • Manual override crank included

    • Telescopic tube — no cutting required

    • Durable powder-coated aluminium ends

    • Sleek, minimalist design

     

    Request My Talos Reel Quote

  • The Speck Super 90 Series is a premium German-engineered pool and spa pump range, renowned worldwide for exceptional reliability, quiet operation, and long service life. With over 100 years of engineering heritage, Speck pumps are trusted for their precision manufacturing, robust construction, and consistent performance.

    ​

    Designed to suit New Zealand pool and spa environments, the Super 90 Series delivers smooth, ultra-quiet circulation even under continuous use. These pumps are highly versatile, making them suitable for heating systems, salt chlorination, and automatic pool cleaners. Optimised for energy efficiency and durability, the Super 90 Series offers dependable, hassle-free operation for domestic pool installations.

    ​

    Key Features

    • Precision German engineering for long-term reliability

    • Ultra-quiet, smooth operation across all pool and spa applications

    • Flow rates from 230 to 500 litres per minute for versatile use

    • Available in 1.0 to 2.0 HP to suit pools and spas of all sizes

    • Robust construction using high-quality materials

    • Excellent resistance to corrosion and salt water

    • High efficiency with strong performance at low power input

    • Stable operation with fluid temperatures up to 60°C

    • Motor and pump shaft fully isolated from pool and spa water

    • Closed impeller and stainless steel motor shaft

    • Fan-cooled motor for high ambient temperature conditions

    • Clear, non-corrosive strainer lid for easy inspection and maintenance

    • Every pump factory wet-tested for quality assurance

    ​​

    Available Models

    • Super 90 / 230 — 1.0 HP — Input 1000 W

    • Super 90 / 350 — 1.25 HP — Input 1100 W

    • Super 90 / 400 — 1.5 HP — Input 1300 W

    • Super 90 / 500 — 2.0 HP — Input 1500 W

    ​​

    Applications

    • Domestic swimming pools (in-ground and above-ground)

    • Spas

    • Pools with heating systems

    • Salt chlorination systems

    • Automatic pool cleaning systems

    ​​

    Warranty

    • Five-year factory warranty on wet-end components
      (Casing, diffuser, gland housing, impeller, mechanical seal)

    • Two-year factory warranty on motor and all commercial applications

  • The Madimack InverFlow Eco F300i is an ultra-quiet, energy-efficient variable speed pool pump designed to significantly reduce running costs while delivering reliable, high-performance circulation. Powered by advanced full-inverter technology, the F300i outperforms traditional single-speed pumps by operating more efficiently and with substantially lower noise levels.

    ​

     

    Ideal for both new installations and pool upgrades, the InverFlow Eco F300i offers simple operation, durable construction, and long-term reliability. Its brushless DC inverter motor allows the pump to run at optimal speeds for different pool functions, helping extend equipment life and improve overall system efficiency.

    ​

    Key Features

    • Full-inverter variable speed technology for maximum energy efficiency

    • Ultra-quiet operation for a more comfortable pool environment

    • Designed to significantly reduce ongoing energy costs

    • Brushless DC inverter motor for long service life and reliability

    • Simple installation and user-friendly operation

    • Durable construction suitable for long-term residential use

    • Ideal for new pools and retrofit upgrades

    ​​

    Product Details

    • Model: Madimack InverFlow Eco F300i

    • Type: Variable speed pool pump

    • Motor: Brushless DC inverter

    • Power: 1.0 HP

    • Energy Rating: High-efficiency, top-rated performance

    • Noise Profile: Ultra-quiet operation

    • Application: Domestic swimming pools

  • The Waterco Micron S Series Media Filters set the industry benchmark for high-performance pool filtration, combining exceptional fibreglass strength with efficient depth filtration for consistently clear water.

     

    Engineered for New Zealand conditions, the Micron S Series features a robust, UV-stabilised tank manufactured from fibreglass-reinforced polyester resin and overwound for superior structural integrity. Designed to deliver long-term reliability, these filters provide outstanding hydraulic efficiency, reduced water resistance, and excellent filtration results across residential and commercial pool applications.

     

    Trusted by pool professionals nationwide, the Micron S Series offers easy operation, reliable backwashing, and long service life—making it a premium filtration solution for pools of all sizes.

    ​

    Key Features

    • Heavy-duty fibreglass tank for long life and corrosion resistance

    • UV-stabilised construction designed for harsh outdoor conditions

    • Advanced depth filtration for superior particle removal and water clarity

    • Hydraulically efficient fish-tail laterals for improved backwashing and water savings

    • Reduced water flow resistance for optimal pump efficiency

    • Multiport valve included for easy operation and maintenance

    • Simple backwash process via lever control—no complex procedures

    • Wide size range suitable for residential through to large commercial pools

    ​​

    Available Models

    • S500 — Ideal for small residential pools

    • S600 — Suited to medium residential pools

    • S702 — Designed for larger residential and light commercial pools

    • S800 — High-capacity filtration for large pools

    • S900 — Commercial-grade filtration for very large pool installations

    ​​

    Media Compatibility

    • Compatible with sand media

    • Compatible with glass filtration media for enhanced filtration performance

    ​​

    Warranty

    • 10-year tank warranty

    • 1-year warranty on components

    • All models supplied with multiport valve

  • The Poolrite SQI Quiteline Range delivers whisper-quiet, high-performance pool pumping, engineered in Australia for demanding residential and commercial environments. Renowned worldwide for reliability and exceptionally low noise output, the SQI series is designed to enhance comfort while maintaining powerful, consistent water circulation.

    ​

    Powered by the proven CMG light industrial motor, these pumps combine robust construction with advanced hydraulic noise reduction. A corrosion-proof resin body, glass-reinforced impellor, and IP44 weather-resistant rating make the SQI range ideal for long-term operation in New Zealand conditions.

    ​

    Designed for ease of maintenance and high-load performance, the SQI Quiteline Range is suitable for pools, spas, and systems requiring multiple jets.

    ​

    Key Features

    • Whisper-quiet motor and hydraulic noise reduction

    • CMG light industrial motor for durability and long service life

    • Glass-reinforced, closed-face impellor for high performance

    • Largest strainer basket on the market to reduce maintenance frequency

    • Clear strainer lid for quick visual inspection

    • Twist-knob access for easy cleaning and servicing

    • Low-noise internal diffuser for smoother, quieter operation

    • Double-insulated, weatherproof construction (IP44 rated)

    • Heavy-duty thermal overload protection for added safety

    • Corrosion-proof resin body designed for harsh pool environments

    • Manufactured in Australia to commercial-grade standards

    • Extensive manufacturer warranty

    ​​

    Available Models

    • SQI 400 — 1.0 HP / 0.75 kW — Up to 4 jets

    • SQI 500 — 1.25 HP / 0.93 kW — Up to 5 jets

    • SQI 600 — 1.5 HP / 1.1 kW — Up to 6 jets

    • SQI 700 — 2.0 HP / 1.5 kW — Up to 8 jets

    ​​

    Power Details

    • SQI 500 — Input 1300W / Output 930W / 1.25 HP

    • SQI 600 — Input 1550W / Output 1100W / 1.5 HP

    • SQI 700 — Input 2000W / Output 1500W / 2.0 HP

     

    Applications

    • In-ground swimming pools (residential and commercial)

    • Spas and spa pools

    • Water features

    • Pool systems requiring multiple jets

waterco-supastream-pool-pump-aquatech.png

  • The Waterco Supastream Range delivers reliable, energy-efficient performance for swimming pools and low-pressure water recirculation systems. Designed for everyday pool operation, these pumps combine durable construction with efficient hydraulic engineering to reduce run times and energy consumption.

    ​

    Featuring high-grade stainless steel mechanical seals and a self-priming design, Supastream pumps are built for long service life and minimal maintenance. Advanced diffuser and impeller design improves flow efficiency, while the high-performance motor includes fan cooling and thermal overload protection for safe, continuous operation.

    ​

    Suitable for a wide range of pool sizes and spa applications, the Supastream Range is available in multiple power options to match specific installation requirements.

    ​

    Key Features

    • Durable high-grade stainless steel mechanical seals

    • Self-priming design for reliable start-up

    • Efficient hydraulic design for reduced energy use

    • High-performance motor with fan cooling and thermal overload protection

    • Large 1.5L strainer basket to protect against debris

    • Secondary seal for added protection

    • Quick-connect unions for straightforward installation

    • 3-year conditional warranty

    ​

    Available Models

    • Supastream 0.50 HP — Small pools, water recirculation

    • Supastream 0.75 HP — Medium pools

    • Supastream 1.00 HP — Medium to large pools, spas

    • Supastream 1.50 HP — Large pools, spas

    ​​

    Additional Information

    • Strainer basket capacity: 1.5L

    • Connections: 40mm / 1½” and 50mm / 2″ (model dependent)

    • Approximate weight: 25 kg per pump

    • Manufactured for reliable long-term performance in residential and commercial pool environments

Professional Pool & Spa Pumps

  • The Onga Pool Leisuretime Solar Range is purpose-built to handle the elevated water temperatures produced by solar pool heating systems, delivering reliable circulation and efficient performance for solar-boosted pools. Designed specifically for solar applications, these pumps ensure consistent flow while integrating seamlessly with existing pool filtration systems.

    ​

    Engineered for durability and dependable operation, the Leisuretime Solar Range features robust construction suited to long-term outdoor use. Available in multiple sizes, these pumps provide an efficient and practical solution for residential pools requiring dedicated solar heating circulation.

    ​

    Key Features

    • Designed specifically for solar pool heating applications

    • Capable of handling high temperatures from solar-heated water

    • Robust construction for long service life

    • Efficient, dependable performance for boosted solar systems

    • Easy integration with existing pool filtration setups

    • Available in multiple sizes to suit a wide range of pool volumes

    ​​

    Available Models

    • LTP400S — 0.5 HP — 585 W — 2.7 A

    • LTP550S — 0.75 HP — 757 W — 3.5 A

    • LTP750S — 1.0 HP — 930 W — 4.3 A

    ​​

    Technical Overview

    • Designed for solar-heated water circulation

    • Suitable for residential pool solar heating systems

    • Durable design for reliable long-term operation

  • Onga SilentFlo Range is an ultra-quiet, high-efficiency self-priming pool pump designed for reliable everyday performance with minimal noise and reduced energy use.

    ​

    The Onga SilentFlo is an ultra-quiet, high-efficiency, self-priming medium head pump available in 3/4hp to 2hp models. Precision-moulded from Pentair’s advanced thermoplastic composite resin, SilentFlo offers outstanding corrosion resistance and minimises operational noise, making it ideal for running overnight or during off-peak hours. A large integral hair and lint strainer reduces maintenance, while the high-quality mechanical seal, stainless steel shaft, and robust fasteners ensure years of reliable performance.

    ​

    Key Features:

    • Ultra-quiet operation with noise-dampening casing and elevated base

    • High-efficiency hydraulic design for energy savings and extended pump life

    • Extra-large strainer basket for less frequent clean-outs

    • Dual connections: 50mm thread or quick-disconnect barrel unions included

    • Cam & Ramp™ lid: easy quarter-turn removal and secure locking

    • Self-priming for effortless starting and reliability

    • Durable, corrosion-resistant composite construction

    • 3-year limited warranty

    ​

  • The Onga Leisuretime Range offers dependable, cost-effective pool pumps designed for small to medium domestic pools and spas. Engineered for everyday pool operation, these pumps deliver reliable performance, corrosion resistance, and excellent value.

    ​

    Ideal for in-ground and above-ground pools, solar heating circuits, and spas, the Leisuretime Range is built for durability and quiet operation. With simple installation and low maintenance requirements, it’s a practical choice for homeowners seeking long-term reliability without unnecessary complexity.

    ​

    Key Features

    • Reliable, energy-efficient performance for everyday pool use

    • Corrosion-resistant electro-phoretic plated cast iron end shield

    • Elevated motor foot helps protect against moisture damage

    • Large, clear hair and lint pot for easy inspection and cleaning

    • Self-aligning barrel unions for fast installation

    • IP55 motor protection against dust and water

    • Quiet operation suitable for residential environments

    • Approved for pool zone installation (AS/NZS 3136:2001 compliant)

    ​​

    Suitable Applications

    • Small to medium domestic swimming pools

    • Above-ground pools

    • Spas

    • Solar heating circulation systems

    • Clean, non-aggressive pool water

    ​​

    Available Models

    • LTP400 – 0.5 HP
      Ideal for small pools and solar heating systems

    • LTP550 – 0.75 HP
      Suitable for small to medium pools

    • LTP750 – 1.0 HP
      Ideal for pools and spas

    • LTP1100 – 1.5 HP
      Designed for larger pools and spa applications

    ​​

    Technical Overview

    • Single-phase, 230V AC

    • IP55 rated motor protection

    • Carbon / ceramic mechanical seals

    • Quiet, energy-efficient operation

    • Designed for easy servicing and long service life

    ​​

    Warranty

    • 2-year manufacturer warranty

  • The Onga Pentera Range delivers reliable, energy-efficient pool and spa pumping engineered for years of trouble-free operation. Designed for domestic swimming pools, spas, and solar heating systems, the Pentera Range provides consistent performance with minimal maintenance.

    ​

    Built with high-quality materials and a robust Series 2 motor, these pumps are ideal for pool volumes ranging from 20,000L to 100,000L. Their corrosion-resistant construction and advanced motor protection make them a dependable choice for both standard filtration and solar circulation applications.

     

    Key Features

    • Reliable, energy-efficient performance for pools and spas

    • Stainless steel motor shaft for enhanced corrosion resistance

    • Heavy-duty 316 stainless steel double-lipped mechanical seal

    • IP55 TEFC motor for superior dust and water protection

    • Self-aligning barrel unions for easy installation

    • Plastic yoke and lip-seal design protects motor from water ingress

    • Built-in drain-down clacker for easier servicing

    • Large lint and hair pot with clear, easy-view lid

    • Low-friction O-ring enables tool-free lid removal

    ​​

    Suitable Applications

    • Domestic swimming pools (20,000L–100,000L)

    • Spas

    • Solar heating circulation systems

    • Above-ground pools

    • Clean, non-aggressive water (no solids or fibres)

     

    Technical Overview

    • Maximum working pressure: 295 kPa

    • Pool water temperature range: 5°C – 35°C

    • Maximum ambient temperature: 50°C

    • TEFC 2-pole motor, 2800 RPM

    • IP55 rating, Class F insulation

    • Automatic thermal overload protection

    • Materials include glass-filled ABS components, stainless steel shaft, ceramic/carbon/nitrile seals

    • Fully compliant with AS/NZS 3136:2001 electrical standards

     

    Warranty

    • 3-year limited warranty

  • The Onga Leisuretime Range offers dependable, cost-effective pool pumps designed for small to medium domestic pools and spas. Engineered for everyday pool operation, these pumps deliver reliable performance, corrosion resistance, and excellent value.

    ​

    Ideal for in-ground and above-ground pools, solar heating circuits, and spas, the Leisuretime Range is built for durability and quiet operation. With simple installation and low maintenance requirements, it’s a practical choice for homeowners seeking long-term reliability without unnecessary complexity.

    ​

    Key Features

    • Reliable, energy-efficient performance for everyday pool use

    • Corrosion-resistant electro-phoretic plated cast iron end shield

    • Elevated motor foot helps protect against moisture damage

    • Large, clear hair and lint pot for easy inspection and cleaning

    • Self-aligning barrel unions for fast installation

    • IP55 motor protection against dust and water

    • Quiet operation suitable for residential environments

    • Approved for pool zone installation (AS/NZS 3136:2001 compliant)

    ​​

    Suitable Applications

    • Small to medium domestic swimming pools

    • Above-ground pools

    • Spas

    • Solar heating circulation systems

    • Clean, non-aggressive pool water

    ​​

    Available Models

    • LTP400 – 0.5 HP
      Ideal for small pools and solar heating systems

    • LTP550 – 0.75 HP
      Suitable for small to medium pools

    • LTP750 – 1.0 HP
      Ideal for pools and spas

    • LTP1100 – 1.5 HP
      Designed for larger pools and spa applications

    ​​

    Technical Overview

    • Single-phase, 230V AC

    • IP55 rated motor protection

    • Carbon / ceramic mechanical seals

    • Quiet, energy-efficient operation

    • Designed for easy servicing and long service life

    ​​

    Warranty

    • 2-year manufacturer warranty

  • The Waterco Aquastream Solar Range is purpose-built for solar pool heating systems, delivering quiet, reliable performance with efficient water circulation and low running costs. Designed for residential pools, these pumps provide the consistent flow required for effective solar heating while maintaining energy efficiency and long-term reliability.

    ​

    Engineered with advanced hydraulic design, the Aquastream Solar Range maximises water flow and efficiency while reducing power consumption. Its robust, corrosion-resistant construction and secondary seal system offer enhanced protection and extended service life, even in demanding pool environments. An integrated solar check valve prevents backflow, supporting reliable solar system operation.

    ​

    Key Features

    • Whisper-quiet operation for residential pool environments

    • Optimised hydraulic design for efficient solar heating circulation

    • Easy to operate and maintain

    • Heavy-duty, corrosion-resistant engineering plastics

    • Stainless steel components for added durability

    • High-grade mechanical and secondary seals for enhanced motor protection

    • Integrated solar check valve to prevent backflow

    • Designed specifically for solar pool heating systems

    • Multiple size options to suit a wide range of pool volumes

    ​​

    Available Models

    • Aquastream Solar 50 — 0.5 HP — Suitable for pools 35,000 to 50,000 litres

    • Aquastream Solar 75 — 0.75 HP — Suitable for pools 50,000 to 60,000 litres

    • Aquastream Solar 100 — 1.0 HP — Suitable for pools 55,000 to 65,000 litres

    • Aquastream Solar 150 — 1.5 HP — Suitable for pools 60,000 to 80,000 litres

    ​​

    Technical Overview

    • Designed for solar pool heating circulation

    • Pump ports: 40mm

    • Robust construction for long-term outdoor use

  • The Waterco Supatuf MK2 Range delivers powerful, reliable pool pump performance for large domestic swimming pools and spas. Designed for demanding pool environments, the Supatuf MK2 is ideal for installations with additional systems such as heating, in-floor cleaning, fountains, vacuum cleaning, and swim jets.

    ​

    Built for durability and long service life, the Supatuf MK2 features a robust construction with a secondary seal for added protection and a large strainer basket to reduce maintenance. With strong flow rates and easy installation via quick-connect unions, this range is a dependable solution for high-capacity residential pool systems.

    ​

    Key Features

    • Designed for large domestic pools with advanced ancillary systems

    • Powerful, high-performance circulation for demanding applications

    • Durable construction with secondary seal protection

    • Large 2.1L strainer basket to minimise maintenance requirements

    • 50mm quick-connect unions for straightforward installation

    • Reliable operation under continuous use

    • Available in multiple power options to suit different pool sizes

    • Backed by a 3-year conditional warranty

    ​​

    Available Models

    • Supatuf MK2 100 — 1.0 HP — Suitable for large domestic pools

    • Supatuf MK2 150 — 1.5 HP — Ideal for pools with heating and cleaning systems

    • Supatuf MK2 200 — 2.0 HP — High-capacity performance for demanding installations

    ​​

    Technical Overview

    • Pump inlet / outlet: 50mm

    • Strainer basket capacity: 2.1L

    • Power supply: Single phase

    • Voltage: 220–240V

    • Frequency: 50Hz

    • Operating speed: 2860 RPM

    ​​

    Applications

    • Large domestic swimming pools

    • Pools with heating systems

    • In-floor cleaning systems

    • Water features and fountains

    • Vacuum cleaning systems

    • Swim jet installations

  • The Waterco Supatuf MK2 ECO 100 is a high-efficiency 3-speed pool pump designed for large domestic swimming pools requiring powerful yet economical operation. Built to support advanced pool systems, the ECO 100 delivers quiet performance and reduced energy consumption without compromising circulation strength.

    ​

    Featuring an innovative permanent magnet brushless DC motor, the Supatuf MK2 ECO 100 provides exceptional efficiency and ultra-quiet operation across all three speed settings. This allows the pump to adapt to different pool functions—such as filtration, heating, cleaning, and water features—while significantly lowering running costs and noise levels.

    ​

    Ideal for modern pool installations, the ECO 100 offers reliable performance, long service life, and flexible operation for demanding residential applications.

    ​

    Key Features

    • Energy-efficient 3-speed operation to reduce power consumption and noise

    • Permanent magnet brushless DC motor for high efficiency and reliability

    • 7-star energy rating for maximum energy savings

    • Ultra-quiet operation suitable for day and night use

    • Designed to support advanced pool systems and high-flow requirements

    • Reliable performance for large domestic pools

    • Backed by a 3-year conditional warranty

    ​​

    Technical Overview

    • Motor type: Permanent magnet brushless DC

    • Speed settings: 3-speed adjustable

    • Energy rating: 7 stars

    • Warranty: 3 years (conditional)

    ​​

    Applications

    • Large domestic swimming pools

    • Pools with heating systems

    • In-floor cleaning systems

    • Water features and fountains

    • Vacuum cleaning systems

    • Swim jet installations

waterco-supastream-pool-pump-aquatech.png

  • The Waterco Hydrostorm High Performance Range is purpose-built for demanding pool environments, delivering powerful, reliable pumping for commercial and extra-large residential pools. Designed to handle high flow and pressure requirements, this range is ideal for systems with water features, in-floor cleaning, vacuum cleaning, and powerful swim or spa jets.

    ​

    Engineered for durability and long service life, Hydrostorm pumps are a trusted solution for heavy-use pools and installations with extensive ancillary systems. Their robust construction and consistent performance make them a dependable choice where reliability and power are essential.

    ​

    Key Features

    • Designed for commercial and extra-large residential pools

    • High-performance pumping for demanding applications

    • Extra power to support water features, in-floor cleaning, and swim/spa jets

    • Reliable operation with heavy-duty construction

    • Consistent flow and pressure for intensive pool systems

    • Available in multiple power options to suit different system requirements

    • 3-year conditional warranty for added peace of mind

    ​​

    Available Models

    • Hydrostorm 100 — 1.0 HP — High-performance circulation

    • Hydrostorm 150 — 1.5 HP — Enhanced flow for demanding systems

    • Hydrostorm 200 — 2.0 HP — Maximum power for heavy-duty applications

    ​​

    Performance Overview

    • Hydrostorm 100 — Approx. 250 L/min at 8 m head

    • Hydrostorm 150 — Approx. 350 L/min at 8 m head

    • Hydrostorm 200 — Approx. 370 L/min at 8 m head

    ​​

    Technical Highlights

    • 50mm ports with 50mm unions

    • Heavy-duty motor frame for continuous operation

    • Designed for long-term use in high-load pool systems

    ​​

    Applications

    • Commercial swimming pools

    • Extra-large residential pools

    • Water features

    • In-floor cleaning systems

    • Vacuum cleaning systems

    • Swim and spa jet installations

  • The Oasis X Series Fixed Speed Heat Pumps deliver exceptional heating performance and reliability for pools and spas. Featuring advanced technology, durable construction, and industry-leading efficiency, the X Series lets you extend your swim season in comfort.

    ​

    Key Features:

    • 10% more heating capacity for faster warm-up times

    • Auto defrost and cooling modes for year-round temperature control

    • Highly efficient titanium spiral heat exchanger (lifetime warranty against corrosion)

    • Commercial-grade, rustproof ABS casing

    • Super quiet operation

    • Designed for extended season or all-year heating

    ​

    Model options:

    • OASIS X19 (17kW) – Suitable for spas and medium-sized pools

    • OASIS X24 (21kW) – Ideal for larger pools

    ​​

    Specifications:

    Model: X19

    • Heating capacity: 17 kW

    • Power input: 2.85 kW

    • Running current: 13 A

    • Power supply: 230 V / 1 Phase / 50 Hz

    • Dimensions (L × W × H): 1156 × 487 × 790 mm

    ​​

    Model: X24

    • Heating capacity: 21 kW

    • Power input: 3.8 kW

    • Running current: 17.5 A

    • Power supply: 240 V / 1 Phase / 50 Hz

    • Dimensions (L × W × H): 1115 × 455 × 868 mm

    ​​

    Warranties

    All Oasis models include a comprehensive 3-year parts and 1-year labour guarantee, plus a lifetime warranty on the titanium heat exchanger against corrosion.

  • The Oasis i Series Inverter Heat Pump is your smart, low-maintenance solution for reliable year-round pool and spa heating. With industry-leading inverter technology, the i Series automatically adjusts output for the most efficient energy use—delivering savings of up to 30% compared to standard fixed-speed pumps.

    Its compact, quiet design is perfect for backyards, with Wi-Fi connectivity for easy remote control and a sleek, user-friendly glass controller. The i Series uses environmentally safe R32 refrigerant and comes in a range of models to suit any pool or spa.

    ​

    Key Features:

    • Variable speed inverter technology for reduced energy costs

    • Quiet mode for minimal noise during operation

    • Wi-Fi module for convenient remote control as standard

    • Glass controller with full diagnostics

    • Environmentally safe R32 refrigerant

    • Compact single-fan and double-fan options

    • Industry-leading warranty: 3 years parts, 1 year labour, lifetime titanium heat exchanger warranty

    • Suitable for new builds or retrofit

    ​

    Model options

    • i12: 10kW

    • i17: 13.6kW

    • i19: 17kW

    • i25: 21kW

    • i28D: 25kW (Double Fan)

    • i34T: 30kW (Double Fan)

    • (New i25 model: single fan, smaller footprint)

    ​​

    Warranties

    All Oasis models include a comprehensive 3-year parts and 1-year labour guarantee, plus a lifetime warranty on the titanium heat exchanger against corrosion.

  • The Oasis Urban i-Spa 9 Inverter Heat Pump is the perfect energy-efficient heating solution for home and commercial spas up to 5000 litres. Thanks to variable speed inverter technology, it automatically adjusts power to match your spa’s heating needs—reducing running costs by up to 30% compared to standard models. Enjoy silent operation, easy smart controls, and a sleek, modern design that looks at home in any setting.

    ​

    Key Features:

    • Energy savings up to 30% with inverter technology

    • Ultra-quiet operation and ‘silent mode’

    • Double-side airflow for superior heat exchange in tight spaces

    • Durable, matt-finished weather-resistant cabinet

    • Modern touchscreen controller with 32-bit processor

    • App control (Bluetooth, Wi-Fi, 4G) for remote heating management

    • Suitable for spas up to 5500L and heating up to 38°C

    • Friendly NZ-based backup and support

    ​​

    Specifications

    • Heating Capacity: Up to 7kW (at 19°C air), 9kW (at 27°C air)

    • Input Power: 1.43kW

    • Running Current: 6.31A

    • Power Supply: 230V / 50Hz

    • Water Connection: 40mm

    • Water Flow Volume: 3.7 m³/h

    • Water Pressure Drop (max): 6.87 kPa

    • Dimensions (L/W/H): 1000 x 430 x 620 mm

    • Weight: 61kg

    ​

    Warranties

    Comprehensive 3-year parts and 1-year labour guarantee, plus lifetime warranty on the titanium heat exchanger against corrosion.

  • Waterco Digiheat Titanium Electric Spa Heaters deliver powerful, consistent heating with advanced corrosion resistance—ensuring your spa is always ready and comfortable. Fitted with titanium coiled heating elements, these heaters are built to withstand ozone, iodine, baquacil, sea water, and salt or chlorinated spa water. Available in a wide range of capacities, Digiheat is the ideal electric spa heating solution for Kiwi homes and commercial settings.

    ​

    Key Features:

    • Titanium coiled heating elements for maximum durability

    • Suitable for all spa types, including saltwater and chlorinated systems

    • Resistant to ozone, iodine, baquacil, and seawater

    • Fast, reliable electric heating

    • Simple installation and operation

    • Available in models from 2.4kW to 24kW

    • Covered by a 12-month comprehensive warranty

  • The Waterco Electroheat MKV Range offers a smart, cost-effective, and environmentally friendly heating solution for plunge pools, swim spas, spas, and swimming pools. This model is ideal as a solar replacement or season extender, allowing you to enjoy perfectly heated water year-round.

    ​

    Key Features:

    • High density dual coil titanium heat exchanger for superior durability

    • Hydrophilic Blue Fin technology for optimal heat transfer

    • Ozone-friendly R410A refrigerant for eco-efficiency and improved performance

    • Continuous digital pool temperature display with LED control panel

    • Self-diagnosis system with diagnostic error codes

    • Weatherproof cabinet and compact design (126cm W x 36cm L x 71cm H)

    • Quiet, reliable scroll compressor

  • The Waterco Electroheat ECO-V Top Vent Inverter Range delivers efficient, reliable pool heating—even in cooler climates where ambient temperatures drop close to 0°C. Using advanced inverter technology, these heat pumps automatically adjust compressor and fan speeds for optimal performance and up to 20% energy savings compared to fixed-speed systems. The top vent design gives you greater flexibility for installation, while heating and cooling modes make this unit perfect for swimming pools, plunge pools, swim spas, and traditional spas.

    ​

    Available in:

    • 12kW (heating only)

    • 17kW, 21kW, 25kW, 35kW, and 45kW (heating/cooling)

    ​​

    Key Features:

    • Inverter technology for energy efficiency and quieter operation

    • Top venting allows for more installation options

    • Digital controller with diagnostics for easy monitoring

    • Heating and cooling modes for year-round use

    • Hydrophilic blue fin coated evaporator resists erosion in humid/coastal environments

    • Automatic hot gas evaporator de-icing

    • R32 or R410A refrigerant for eco-friendly operation

    • Supplied with drainage spigots for convenient condensate management

    • Refrigerant pressure gauge for easy maintenance

  • The Waterco Electroheat ECO-V Side Inverter Venting Range brings next-level efficiency to your pool or spa heating, offering both heating and cooling capabilities with advanced inverter technology. The side venting design allows for more flexible installation in a variety of settings. Available in 5kW, 9kW, 12kW, 17kW, and 25kW models, these units are perfect for swimming pools, plunge pools, and spas.

    ​

    Key Features:

    • Inverter technology for faster, more energy-efficient heating/cooling

    • Side venting design for greater installation flexibility

    • Digital controller with built-in diagnostics

    • Heating and cooling operating modes

    • Variable speed compressor reduces power usage and noise

    • Hydrophilic blue fin coated evaporator for maximum corrosion resistance

    • Automatic hot gas evaporator de-icing

    • R32 or R410A refrigerant (eco-friendly options)

    • Supplied with drainage spigots and refrigerant pressure gauge

  • The Waterco Turbotemp Gas Pool Heater is engineered for top performance, energy efficiency, and peace of mind. With its space-saving compact design, this heater combines a fully pre-mixed burner system for optimal air/gas mixture, push-button digital controls, and quiet operation. Certified for low NOx emissions and packed with safety features, Turbotemp sets the standard for modern gas pool heating.

    ​

    Key Features:

    • Compact, space-saving design

    • High-efficiency pre-mixed burner system

    • Hot surface ignition—no pilot required

    • Push-button digital controls with rotating display

    • Super quiet operation

    • Certified for low NOx emissions

    • Multiple safety features (pressure switch, over-temp, flue sensor, manual gas shut-off)

    • Approved for installation on combustible surfaces

    • Available in natural gas and propane models

    • Dimensions: 53.3cm (L) x 53.3cm (W) x 71.1cm (H)

  • The Waterco Electroheat Plus Range is the latest advancement in swimming pool heating, using heat pump technology to extract and intensify latent heat from the air and transfer it to your pool. These heat pumps are an energy-efficient way to extend your swimming season, letting you enjoy warm water for more months of the year. Available in 25kW, 31kW, and 44kW models to suit different pool sizes and heating needs.

    ​

     

    Key Features:

    • Energy efficient pool heating with advanced heat pump technology

    • Temperature management and easy self-diagnosis with control panel

    • Durable weatherproof cabinet for all conditions

    • Long-lasting titanium heat exchanger

    • Efficient and eco-friendly R410 refrigerant

    • Free shipping NZ-wide

Professional Heat Pumps for Pools & Spas

  • Waterco Cartridge Filters – Trimline Range are durable, top-loading cartridge pool filters designed for efficient filtration, easy maintenance, and long service life in residential and commercial pools.

    ​

    The Waterco Trimline Cartridge Filter range is designed to deliver premium filtration for residential and commercial pools, spas, and water features—especially where backwashing is not practical or allowed. Using pleated, high-capacity synthetic fabric cartridges, Trimline filters ensure sparkling water with minimal fuss and maintenance.

    ​

    Key Features:

    • Premium Pleated Cartridge: Treated synthetic polyester fabric maximises surface area for superior dirt-holding capacity and longer intervals between cleanings.

    • Durable Construction: Built from high-impact polypropylene for years of trouble-free service.

    • Easy Maintenance: Top-loading design with a user-friendly locking ring—no extra tools required.

    • One-Piece Moulded Tank: Simple, robust design with a 10-year conditional tank warranty.

    • Versatile Application: Ideal for pools, spas, and water features where efficient, effective filtration is needed and backwashing is not feasible.

    • Temperature Range: Operates between 4°C and 50°C.

    ​​

    Specifications

    • Material: Polyester fabric cartridge, vinyl plastisol end caps, polypropylene core

    • Operating Pressure: Up to 20 kPa

    • Warranty: 10-year conditional tank warranty

    • Models: CC50, CC75, CC100

  • Waterco Opal XL Cartridge Range offers high dirt-holding capacity and low-maintenance pool filtration.

    ​

    Opal XL Cartridge Filters are engineered to house an extra-large cartridge, giving you greater dirt-holding capacity and less frequent cleaning. Designed for simplicity and performance, the Opal XL is the ideal solution for pools where backwashing isn’t practical or water is scarce.

    ​

    Key Features:

    • Extra-large pleated cartridge provides up to 270ft² (25.1m²) of surface area—meaning less time spent on cleaning and more time enjoying your pool

    • Quick access dome lid makes cartridge removal, cleaning, and installation fast and simple

    • Constructed from high-impact polypropylene for durability and a long service life

    • Reusable polyester filter fabric for reliable, fine filtration and easy cleaning with a garden hose

    • Simple maintenance—just hose down the cartridge when needed

    • Ideal for pools where water-saving matters

    • Operating temperature: 4°C to 50°C

    • Max pressure drop: 20 kPa

    • Comes complete with filter cartridge and fittings

    • 10-year conditional tank warranty for peace of mind

    ​​

    Model Options

    • Opal XL 225 sq/ft

    • Opal XL 270 sq/ft

  • Waterco Exotuf Plus and Exotuf Side Mount Media Filters provide efficient, water-saving pool filtration with durable construction, optimised flow design, and reliable performance for energy-efficient pool systems.

    ​

    Experience next-generation filtration with Waterco’s Exotuf Plus and Exotuf Side Mount Media Filters—purpose-built to meet the demands of modern New Zealand pools. These advanced filters deliver up to 30% water savings and are ideal for pairing with today’s energy-efficient, low-powered pumps. With innovative fish tail lateral systems for balanced flow and a robust, corrosion- and UV-resistant tank, they deliver consistently clear water, season after season.

    ​

    Key Features:

    • Water Savings of up to 30%: Innovative design maximises filtration while using less water for backwashing

    • Ideal for Energy Efficient Pumps: Delivers peak performance with low-powered and variable speed pump systems

    • 360° Multiport Valve Clamp: Allows full orientation flexibility for fast installation and easy servicing

    • Hydraulically Balanced Flow: Fish tail laterals ensure optimum water distribution for superior filtration and backwashing

    • Enhanced Water Clarity: Superior media distribution results in crystal clear pool water

    • Pressure Rated at 3.5 BAR: Built to withstand the demands of high-performance pool systems

    • Corrosion & UV Resistant: Durable construction for NZ’s harshest outdoor conditions

    • All Models Include Multiport Valve

    ​

    Specifications

    Model: Exotuf Plus

    Mount type: Top mount

    Pressure rating: 3.5 bar

    Ideal use: Most domestic and commercial pools

    ​

    Model: Exotuf Side

    Mount type: Side mount

    Pressure rating: 3.5 bar

    Ideal use: Larger pools and retrofit flexibility

    ​

    Key Features

    • Available in multiple tank sizes (call for details and sizing advice)

    • Compatible with all major pool pumps and filter media

    • Easy access for cleaning and backwashing

  • Onga Leisuretime LSFII Fibreglass Sand Filter delivers reliable, high-performance pool filtration with a durable fibreglass tank, simple operation, and easy maintenance for consistently clear water.

    ​

    The Onga Leisuretime LSFII Fibreglass Sand Filter is your solution for high-performance, crystal-clear water with minimal effort. Designed for maximum durability, easy maintenance, and long-term reliability, this sand filter is trusted by Kiwi pool owners and professionals nationwide. Simple to operate, built to last, and engineered for efficient backwashing and water clarity—it's the filter your pool deserves.

    ​

    Key Features:

    • Exceptional Strength: Spun-woven fibreglass construction for superior durability and chemical resistance

    • Easy Maintenance: Top-mount multi-port valve with pressure gauge and manual air relief for simple operation

    • Efficient Filtration: Even water distribution ensures all water passes through the sand for optimal cleaning

    • Corrosion Resistant: Stainless steel clamp and UV-resistant tank for long life

    • Versatile Installation: 360° rotating multi-port valve simplifies setup in any pool environment

    • Large Sand Capacity: Choose the right model for your pool size—options up to 300kg sand

    • Trusted Brand: Onga is a leading name in pool technology, known for reliable products and support

    ​

    Specifications

    Model: 21-40

    Size: 21"

    Connection: 40 mm

    Filter area: 0.2 m²

    Sand required: 90 kg

    ​

    Model: 25-40/50

    Size: 25"

    Connection: 40 / 50 mm

    Filter area: 0.3 m²

    Sand required: 160 kg

    ​

    Model: 28-50

    Size: 28"

    Connection: 50 mm

    Filter area: 0.38 m²

    Sand required: 200 kg

    ​

    Model: 32-50

    Size: 32"

    Connection: 50 mm

    Filter area: 0.5 m²

    Sand required: 300 kg

    ​

    Operating Specifications

    Max working pressure: 250 kPa

    Max water temperature: 43 °C

    Compatible sand size: 0.5–0.8 mm

  • The Waterco Exotuf Range is renowned as one of the strongest and most reliable pool filters in its class. Engineered using precision injection moulding, Exotuf filters are designed to handle the cyclic pressures of modern pool systems while delivering outstanding water clarity and low-maintenance operation. Corrosion and UV resistance make these filters ideal for New Zealand’s demanding climate—trusted by pool professionals and homeowners alike.

    ​

    Key Features:

    • Granular Media Filtration: Delivers exceptional water clarity for pools of all sizes

    • Ultra-Strong Build: Precision-moulded vessels for superior strength and dependability

    • High Pressure Rated: Up to 3.5 bar (E500/E600), outperforming many competitors

    • Corrosion & UV Resistant: Built to last in tough New Zealand conditions

    • Easy Maintenance: Multiport valve for simple filter control and backwashing

    • Versatile Sizing: Available in four sizes to suit every pool, from compact to large

    ​

    Specifications

    Model: E400
    Pressure rating: 2.5 bar
    Media required: 40 kg
    Application: Small pools

    ​

    Model: E450
    Pressure rating: 2.5 bar
    Media required: 75 kg
    Application: Medium pools

    ​

    Model: E500
    Pressure rating: 3.5 bar
    Media required: 100 kg
    Application: Large pools

    ​

    Model: E600
    Pressure rating: 3.5 bar
    Media required: 150 kg
    Application: Extra-large pools

    ​

    Standard Features
    Granular media filtration
    Multiport valve included
    Designed for all pool types

Professional Pool and Spa Filtration Systems

Efficient Water Care

Get cleaner, healthier water with equipment built for performance and reliability.

Pumps & Filters Key Benefits

Optimised water flow for balanced circulation

Advanced filtration for crystal-clear water

Energy-efficient performance to reduce running costs

Built to last in all NZ weather conditions

Low-maintenance design for year-round use

!

NZ-owned since 1974 • Approved Aqualux® installers • Manufacturer warranty

childen-swimming

Visit Our Auckland Showroom

12 Hill Street, Onehunga, Auckland

See colours and finishes in person at 12 Hill Street, Onehunga, Auckland.
Hours: Mon–Fri, 8:00am–5:00pm

Quote type
Installation required
Project timeframe
Estimated budget range

Request a Pump & Filter Quote

Request pricing for pool or spa pumps and filtration systems. Share your pool size and system details so we can recommend efficient, compatible options. We’ll reply within 1 business day (Mon–Fri).

bottom of page